Pair of hardened chromoly adjustable clevis style tie rods for C7 Corvette. PTFE lined, low torque, high misalignment M16 spherical rod ends on inner and outer joints. This complete tie rod has way more misalignment angle than conventional tie rods in order to allow 70 degrees of steering angle without binding the joints or flexing the rack shaft near full travel. The length is suitable only for use with extended control arms. Bolts right into the Ackerman adjustable hardware on the MAX knuckle. Option for OEM knuckle taper is in shopping cart. Minimum length setting is 390mm from rack shaft to outer joint center. *** The cup end of the steering rack casting needs cutting to clear the M14 bolt going through the clevis. If you do not grind the end of the rack, you will not get full steering angle. See picture gallery for reference.***