~ We are now offering this EXTRA long inner tie rod for use with extremely wide lower control arms. This tie rod is great for people using a custom setup where our classic extended inners are still not long enough to reach the knuckles.
~Note**Has less bearing travel than OEM tie rod(18 degrees vs. 28 center to max)due to double the shaft size for strength, so this should be combined with coilover suspension only.
~ spherical bearing joint ~ 7mm built in rack spacer ~ 7mm longer m16p1.0 rack threads ~ 20mm longer threads on the tie rod end (for our standard length ITR)
Use this long inner & our short (silver) outer w/ our LimitBreak FLCA & Knuckle to gain some clearance on wide/ +offset wheels. We offer 3 inner tie rod lengths & the chart below lists all of the combinations.
|Item ID||Inner Tie Rod ONLY||With OTR min. length||With OTR max. length||With OTRLB min. length||With OTRLB max. length|
|All lengths are in millimeters from end of rack to end of tie rod thread, or when our inner and outer are combined ~ rack to OTR joint center. When using RSPCR rack to inner tie rod forward offset spacer add 35mm.|