All new reproduction of Sumitomo's discontinued alumimum two (38.1mm) piston rear Z32 calipers (These are not reman calipers). Finished in gold paint with laser logos. Sold as a pair of left and right calipers with pads and hardware included. We chose to include brake pads that lock up hard when brakes are cold, which is perfect for handbrake use in drifting. The setup will be to get 2 pairs of our calipers and a Z32 18mm vented twin turbo spec rotor from your local autoparts store & mount them on our dual caliper rear drop knuckles with our reservoir master equipped hand brake. Lots of information is available online
about the other parts you may need to perform a complete brake system upgrade. *MAY BE USED ON BRZ ONLY WITH OUR DROP KNUCKLE
~**ALWAYS MOUNT CALIPERS WITH THE BLEEDER ON TOP ~ Extra caliper paint is available as a $30 option in cart in case you just buy our rears and need to paint your fronts or if you buy one pair of rears from us for the handbrake and you want to paint match your foot brake calipers, you can add the option in checkout. ~ Liquid paint is shipped with reducer, shake well before using. Spraycan propellent is included. Dissassemble rubber piston seals & boots. Prepare the surface so its clean, dry, degreased (maybe sand blast for best results). Wait 30 minutes for the paint to dry before baking in the oven at 140c/284f for 50 minutes. Allow plenty of time for the paint to to cool and completely harden before rebuilding and reinstalling.