<--- FOLLOW US!

FC RX7 Sub Frame Risers - Solid
SKU: FCSFR
Solid Aluminum subframe bushings eliminate old rubber mounts. These bushings raise the subframe upwards to help correct the axle angle and trailing arm angle on lowered cars. In the FC3S RX7, there is a very unique situation where the subframe must be allowed to tilt when you adjust the length of the vertical camber arm for camber adjustment. In order to improve the roll center, and eliminate the sloppy rubber bushings while maintaining the need to pivot for camber adjustment, we came up with a two piece solid bushing with a ball on the topside and socket on the bottom side! These bushings will allow your subframe to tilt when setting alignment. These are not intended to pivot when you are driving. After alignment is set, be sure to re-tighten the subframe and diff mounts.
$70.00

USD

Remove from wishlist Add to wishlist

49 in Stock

  • Solid Aluminum subframe bushings eliminate old rubber mounts. These bushings raise the subframe upwards to help correct the axle angle and trailing arm angle on lowered cars. In the FC3S RX7, there is a very unique situation where the subframe must be allowed to tilt when you adjust the length of the vertical camber arm for camber adjustment. In order to improve the roll center, and eliminate the sloppy rubber bushings while maintaining the need to pivot for camber adjustment, we came up with a two piece solid bushing with a ball on the topside and socket on the bottom side! These bushings will allow your subframe to tilt when setting alignment. These are not intended to pivot when you are driving. After alignment is set, be sure to re-tighten the subframe and diff mounts.

Newsletter Signup

;