A pair of inner tie rods for use only with our custom Super Angle Knuckles (sold separately). Stainless knuckle inserts reinforce the pickup points in our 5 axis machined knuckle. Includes a 94mm steel turnbuckle and high misalignemnt bearing outer joint as well as high grade hardware. For zero bumpsteer arrange the washers as shown in the gallery photos so they match our shop car and our CAD geometry. There is a pair of small 22mm OD washers that goes against the bearing, 2mm thick washer is above & 3mm thick washer is below the rod end bearing / on top of the lock nut. The larger 28 OD washer, 2.5mm thick, is for the bolt head above the knuckle and stainless inserts.